Barn Door Rollers and Songs Installation
The sliding barn doors can add a realistic look to any garden shed or at work shed. The backbone of these doors is the guide and the rollers that are attached to the doors of the building and allow them to slide freely. Most people can install tracks and barn door rollers in a couple of hours.
To install door rollers, double the measured width of the door opening to determine the required length of the track. Cut the track to the required length. Determine the mounting style of the track. Mount the track to the wall. Choose which side of the door opening to slide and mount the track flush with the other side. Place the door face down and place the rollers one to two inches below the top edge of the door.
Begin by placing barn door rollers only by six inches on each side and distribute the rest equally among them. Mark the screw holes and remove the rollers. Make a hole through the door in each mark, using a drill bit that is as wide as the screw holes. Insert the carriage bolts included with the rollers on the front of the door and through the rollers on the back of the door. Adjust with the supplied washers and nuts.